Circuits & Electronics | Earth Science & Field Study | Health | Labware & Supplies | Magnets & Magnetism | Microscopes & Supplies | Models | Optics | Physics | Porcelain Labware | Thermometers | Weights & Measures
Labware & Supplies
Burner Stand
2-way burner stand 2-way burner stand

This stand is ideal for use with alcohol burners. The base is made from 3/16” stainless steel rod with a plated steel mesh top. The stand can be used in either high or low position. Low position: 4”H x 5”W. High position: 5”H x 4”W.
Catalog#  Description  
P35125 2-way burner stand

back to top


Scissors

These 5 1/2" scissors feature rust resistant steel blades with guarded blade tips. Assorted colors. Specific colors cannot be requested. Sold in packages of 12.

 plastic scissor
P60006
Catalog#  Description  
P60006 Plastic Safety Scissors

back to top


Plastic Forceps
pointed
P23107		 blunt
P23108

These molded plastic forceps are excellent for basic dissection or general classroom applications.
Catalog#  Description  
P23107 4" Plastic forcep, pointed, yellow
P23108 4" Plastic forcep, blunt, yellow

back to top


Rubber Stoppers

An excellent grade of rubber. Low sulfur content. Size numbers are molded into the top. One pound per bag.

 rubber stoppers

Assortment Pack Rubber Stopper
Catalog#  Description  
P31922A 1lb. Solid Rubber stopper assortment pack
P31922B 1lb. 1-Hole Rubber stopper assortment pack
P31922C 1lb. 2-Hole Rubber stopper assortment pack

Assortment packs below include solid, 1-hole, and 2-hole stoppers.
Catalog#  Description  
P31922F 1lb. Rubber stopper assortment pack
P31922D 2lb. Rubber stopper assortment pack
P31933D 5lb. Rubber stopper assortment pack


back to top


Cork Borers
nickel-plated brass
These units are nickel-plated brass with a handle and punch. The handles are numbered for identification.
Catalog#  Description  
P32101 Set of 6 (3/16" - 1/2")
P32102 Set of 9 (3/16" - 21/32")

back to top


Brushes

These brushes are ideal for cleaning cylinders, large test tubes, and bottles. Natural black bristle with splayed end provides a thorough cleaning action. The bristles are mounted in twisted galvanized wire.

2 in. bottle brush
Catalog#  Brush Diameter  Brush Length  Total Length  
P34521 2" (5.1cm) 5" (12.7cm) 13" (33cm)
P34520 2" (5.1cm) 6" (15.2cm) 17" (43cm)


back to top


bristle brush
Stiff bristles are mounted in twisted glavanized wire. A rounded tuft at the tip facilitates cleaning of test tubes and small glassware. Available in white nylon or natural bristle.
Catalog#  Style  Brush Dia.  Brush Length  Total Length  
P34507 Nylon 1/2" (1.3cm) 3" (7.6cm) 8" (20cm)
P34506 Nylon 3/4" (1.9cm) 3.5" (8.9cm) 9" (23cm)
P34505 Nylon 11/8" (3.5cm)  4" (10.0cm) 11" (28cm)
P34503 Bristle 1/2" (1.3cm) 3" (7.6cm) 8" (20cm)
P34501 Bristle 3/4" (1.9cm) 3.5" (8.9cm) 9" (23cm)
P34500 Bristle 1 3/8" (3.5cm) 4" (10.0cm) 11" (28cm)


back to top


beaker brush
Dense natural black bristle is mounted in twisted galvanized wire into a durable wooden handle. These brushes feature double-tuft extensions at the top for cleaning into corners of beakers, jars, cylinders, etc.
Catalog#  Brush Dia.  Brush Length  Total Length  
P34551 3" (7.6cm) 6" (15.2cm) 13" (33cm)
P34552 3" (7.6cm) 6" (15.2cm) 16" (41cm)


back to top


white bristle brush

Excellent for cleaning burets, pipets, and long tubing. The white bristles are mounted in twisted galvanized wire. Convenient loop at the end for hanging.
Catalog#  Brush Dia.     Brush Length  Total Length  
P34541 1 1/4" (3.2cm) 5 1/4" (13.3cm) 36" (76cm)
P34540 3/4" (1.9cm) 3 5/8" (9.2cm) 36" (76cm)
P34539 1/2" (1.3cm) 3 1/4" (8.3cm) 36" (76cm)


back to top


white nylon brush
P34530

White nylon brush is designed specifically for cleaning pipets and burettes. The nylon bristles are mounted in twisted galvanized wire. Two different brush widths are tapered to provide maximum cleaning.
Catalog#  Brush #1 Dia.  Brush #2 Dia.  Brush Length  Total Length  
P34530 3/4" (1.9cm) 1/4" (.64cm) 3.5" (8.9cm) 17" (43cm)


back to top


Rubberized Aprons

These aprons are made of a chemical resistant PVC coated cloth which stays flexible. There is reinforcement at the points of strain. Cloth ties at the neck and waist.

 chemical-resistant
Catalog#  Size  
P91000 36x27"
P91001 42x27"
P91002 42x36"
P91003 46x36"

back to top


Test Tube Racks
60 tube rack
These economical, durable plastic test tube racks are stackable and can be completely autoclaved. Easy to assemble for use and disassemble for storage.
Catalog#  Description  Specifications  
P35605-90 White Plastic test tube 90 tube, 13mm diameter
P35605-60 White Plastic test tube 60 tube, 16mm diameter
P35605-40 White Plastic test tube 40 tube, 20mm diameter
P35605-24 White Plastic test tube 24 tube, 25mm diameter
P35605-21 White Plastic test tube 21 tube, 30mm diameter


back to top



S-shape aluminum test tube racks resist rusting. Heavy, low form construction prevents tipping. Etched row numbers allow for easy identification. Same size racks can slide into each other for compact storage.

 aluminum, 50 tube
Catalog#  Description  Specifications  
P35606 Aluminum test tube rack  50 tube, 17mm diameter
P35607 Aluminum test tube rack 50 tube, 12mm diameter


back to top


40 tube rack
P35609
This test tube rack is made of polystyrene and holds 40 tubes up to 18mm in diameter. Comes unassembled.
Catalog#  Description  
P35609 40 test tube rack, 18mm dia.


back to top


15 tube, wooden
P35600		 6 tube, wooden
P35601
12 tube, wooden
P35602		 12 tube, wooden
P35603
13 tube, wooden
P35604		 6 tube, white plastic
P35511
Catalog#  Description  Specification  
P35600 15 tube, wooden two row, 16mm D
P35601 6 tube, wooden one row, 24mm D
P35602 12 tube, wooden one row
P35603 12 tube, wooden two row
P35604 13 tube, wooden two tier, 7x20mm, 6x26mm
P35511 6 tube, white plastic    In-line, 25mm, unassembled


back to top


Funnel Support

Wooden with cast iron clamp. 4 hole.

 wood with cast iron
P35512
Catalog#  Description  
P35512 Funnel Support

back to top


Files
steel triangle
Steel triangle files. Excellent for cutting glass tubing and many other uses.
Catalog#  Size  
P31920 4"
P31921 5"
P31922 6"
P31924 8"

back to top


Support Stands

These units are made of rugged, cast iron for extra stability. They feature a baked-on black chemical resistant finish and chrome plated rods. All rectangle and triangle support stands, cast iron and stamped steel, come with the rod and base packaged together.

 packaging
rectangle
P35201
triangle
P35202		 'A' Shape tri
P35203
Catalog# Shape  Base Size  Rod Length  Rod Diameter  
P35200 Rectangle 4x6" (10x15cm) 18" (45cm) 7/16" (11.1mm)
P35201 Rectangle 5x8" (12.5x20cm) 20" (50cm) 3/8" (9.5mm)
P35201A Rectangle 6x9" (15x23cm) 24" (60cm) 1/2" (12.7mm)
P35201B Rectangle 6.5x11" (16.5x28cm) 36" (90cm) 1/2" (12.7mm)
         
P35202 Triangle 4" (10cm) legs 20" zinc plated 3/8" (9.5mm)
P35202A Triangle 6" (15.2cm) legs 24" zinc plated 1/2" (12.7mm)
P35203 "A" shape 7 3/4" (20cm) legs 23" zinc plated 7/16" (11.1mm)

back to top


chemical-resistant
These units consist of a heavy, stamped steel base with black baked-on chemical resistant finish and a chrome plated rod.
Catalog#  Base Size  Rod Length  Rod Dia.  
P35501 4x6" (10x15cm) 18" (45cm) 7/16" (11.1mm)
P35502 5x8" (12.5x20cm) 20" (50cm) 3/8" (9.5mm)
P35503 6x9" (15x23cm) 24" (60cm) 1/2" (12.7mm)
P35504 6.5x11" (16.5x28cm)   36" (90cm) 1/2" (12.7mm)

back to top


Ringstand

Each set consists of a rectangular stamped steel or cast iron base, a chrome-plated support rod, and a number of nickel-plated support rings.

 ring stand and set
Catalog#  Descriptions  
P35501-1 Stamped Steel Base: 4x6”; Rod: 7/16x18”; Rings: 3” & 4”
P35502-1 Stamped Steel Base: 5x8”; Rod: 3/8x20”; Rings: 3”, 4" & 5”
P35503-1 Stamped Steel Base: 6x9”; Rod: 1/2x24”; Rings: 3”, 4”, 5” & 6”
   
P35201-1 Cast Iron Base: 4x6”; Rod: 7/16x18”; Rings: 3” & 4”
P35202-1 Cast Iron Base: 5x8”; Rod: 3/8x20”; Rings: 3”, 4”& 5”
P35203-1 Cast Iron Base: 6x9”; Rod: 1/2x24”; Rings: 3”, 4”, 5” & 6”

back to top


Chemistry Hardware Kit

Chemistry hardware kit includes an assortment of hardware most often used in general chemistry labs. Contains one of each of the following items:

 chemistry hardware
  • Beaker Tong
  • Burette Clamp
  • Burner Tripod
  • Crucible Tong
  • Pinchcock Clamp
  • Pipe Clay Triangle
  • Right Angle Clamp
  • Support Ring, 4"
  • Support Stand, 5x8"
  • Test Tube Rack, 6-Tube
  • Test Tube Tong
  • Wire Gauze, 5x5"
Catalog#  Descriptions  
P38001 Chemistry Hardware Kit


back to top


Burners
cast iron base
P42001
This is an excellent adjustable bunsen burner for use with natural gas. Heavy duty cast iron base provides an extra measure of stability. The unit has a chrome plated steel tube with air regulator and threaded needle valve.
Catalog#  Description  
P42001 Economy Bunsen Burner

back to top



This is an excellent alternative to the traditional, unsafe glass alcohol burners. This unit can be tipped and it will not leak. The chrome plated tank is fitted with a screw top and rubber gasket for longer burning times. Unit comes complete with snuffer cap, draft shield, rubber keeper, and instruction manual.

 chrome plated tank
P42002
Catalog#  Description  
P42002 Wickless Alcohol Burner

back to top


chrome plated tank
P42003
This is similar to our P42002 Wickless Alcohol Burner. The additional head allows for higher temperatures and more even heating.
Catalog#  Description  
P42003 Dual Head Wickless Alcohol Burner

back to top


Burner Tripod

Burner tripods consist of a black chemical resistant enamel ring mounted on zinc plated detachable legs. Comes unassembled for convenient storage.

 burner tripod
Catalog#  Height  Ring O.D.  Ring I.D.  
P35101 6" (15cm)    3.5" (8.8cm) 1.8" (4.6cm)
P35102 9" (23cm) 3.5" (8.8cm) 1.8" (4.6cm)
P35103 9" (23cm) 5" (12.5cm) 3" (7.5cm)


back to top


Support Rings
zinc plated cast iron
Zinc plated cast iron support rings with integral support clamps for attaching to support rods from 5/16" to 5/8" in diameter.
Catalog#  Ring I.D.  Ring O.D.  
P35400 1.5" 2"
P35401 2.5" 3"
P35402 3.5" 4"
P35403 4.5" 5"
P35404 5.5" 6"
P35405 6.5" 7"


back to top



Extension support rings are made of zinc plated steel.

 2in. diameter
Catalog#  Inner Diameter  
P35420 2"
P35421 3"
P35422 4"
P35423 5"


back to top


plated steel ring
Economy support rings are comprised of a plated steel ring with an aluminum muff.
Catalog#  Inner Diameter  
P35410 2"
P35411 3"
P35412 4"
P35413 5"


back to top


Clamps & Holders

These versatile right angle clamps feature a large, easy to use thumbscrew. Available in either cast iron or aluminum.

 cast iron and aluminum
Catalog#  Material  Specifications  
P35011 cast iron 4.5" long, for rods up to 3/4" Dia.
P35012 aluminum 4.5" long, for rods up to 3/4" Dia.


back to top


'C' clamp
Designed for clamping items together or securing items to a table. Cast iron with light gray corrosion resistant paint.
Catalog#  Jaw Opening  
P35000 2"
P35001 3"
P35002 4"
P35003 6"
P35004 5"


back to top



This clamp will hold rods vertically or horizontally. The clamp is cast-iron with a black enamel finish. Fits tabletop to 1 5/8”. Comes with a chrome plated rod 3/8” X 20”.

 clamp and support rod
P35015
Catalog#  Description  
P35015 Clamp & Support Rod


back to top


polished aluminum and brass
P35064
An excellent clamp for supporting thermometers. Made of a polished aluminum muff with brass clamping jaws. The jaws can be rotated and locked at any angle.
Catalog#  Description  
P35064 Thermometer Clamp


back to top



This clamp is made of chemical resistant zinc coated spring steel. Clamp flexible tubing with diameters up to 5/8”.

 chemical resistant
P35051
Catalog#  Opening  Dimensions  
P35051 5/8" 1.5" (38mm) x 1.75" (44mm)


back to top


metal clamps wooden test tube clamp
P35039

Standard type designed to hold test tubes, small flasks, etc. Self-closing jaws. Available with or without finger grips.
Catalog#  Length  Opening  Description  
P35040 5" (13cm) 1.25" (32cm)     w/o grips
P35041 5.5" (14cm) 2.25" (57mm) w/ grips
P35040B 5" (13cm) 1.25" (32cm) Brass w/o grips
P35039 7.25" (19cm)     0.75" (19mm) Wood


back to top


extruded aluminum
P35014

This unit is made of extruded aluminum and attaches the clamp at a right angle from horizontal or vertical rods. Easily slipped in from the side and attaches to support frame rods up to 3/4”. Holds clamps up to 1/2” dia.
Catalog#  Description  
P35014 Clamp Holder


back to top


Wire Gauzes
iron wire gauze iron wire gauze

Iron wire gauze available with or without ceramic center. Double turned edges eliminate sharp wire ends.
Catalog#  Size  Ceramic Center Dia.  
P35070 3x3" (7.5x7.5cm)    (5cm)
P35071 4x4" (10x10cm)    (6.5cm)
P35072 5x5" (12.5x12.5cm)    (8cm)
P35073 6x6" (15x15cm)    (10cm)
P35075 4x4" (10x10cm)    none
P35076 5x5" (12.5x12.5cm)    none
P35077 6x6" (15x15cm)    none


back to top


Hook Collars

These units are excellent for attaching cords, pulleys, pendulums and other apparatus to support rods. The nickel-plated hook collars come with hook and thumbscrew.

 nickel-plated
Catalog#  Description  
P35022 Hook collar for 1/2" rod
P35023 Hook collar for 3/4" rod


back to top


Scissor Jack
chrome plated
P35081		 black enamel
P35085

Ideal for supporting or elevating beakers, flasks, water baths, stirrers, and other lab equipment. Elevates from 3” to 10.5”. Oversized knob allows for quick and easy adjustment. Made of high strength steel and available in several finishes.
Catalog#  Platform Size  Max Load  Finish  Min Height  Max Height  
P35080 6x6" 100lbs   Chrome plated 3" 10"
P35081 8x8" 200lbs Chrome plated 3" 10"
P35082 6x6" 100lbs Stainless steel 3" 10"
P35083 8x8" 200lbs Stainless steel 3" 10"
P35084 6x6" 100lbs Black enamel 3" 10"
P35085 8x8" 200lbs Black enamel 3" 10"


back to top


Burette Clamps
uncoated jaws coated jaws

Excellent for holding small objects such as burettes. The round jaws open from 15mm to 45mm (1/2" to 3/4"). the clamp attaches to rods up to 13mm (1/2") O.D. Jaws can be rotated and locked at any angle.
Catalog#  Description  
P35061 uncoated jaws
P35062 coated jaws


back to top


uncoated jaws
P35063
These clamps have one flt jaw and one "V" shaped jaw. The jaws can open from 6mm to 36mm and can be rotated and locked at any angle.
Catalog#  Description  
P35063 uncoated jaws
P35065 coated jaws


back to top



Holds two burettes from micro to 100ml. Simply compress mechanism, insert burette, and release. Constructed of light weight aluminum with a baked-on chemical resistant white enamel finish. Unit attaches to standard support rods up to 5/8”.

 aluminum double burette clamp
P35035
Catalog#  Description  
P35035 Aluminum Dbl. Burette Clamp


back to top


zinc plated stamped steel
P35034
This zinc plated stamped steel burette clamp has a steel thumbscrew and can be used with rods up to 3/4” in diameter. The distance between the two burettes is 7 1/4” (18.4cm).
Catalog#  Description  
P35034 Lincoln-Type Burette Clamp


back to top


Tongs

Designed for use with beakers from 50ml to 2000ml. Made of zinc plated steel with flat riveted joint. Easy grip handles. Available with or without coated jaws. Maximum jaw opening is 7” (18cm). Length is 9.5” (244mm).

 coated jaws
P35042
Catalog#  Description  
P35042 Coated Jaws
P35042A Uncoated Jaws


back to top


stainless steel
Tapered tips are serrated and meet tightly for better gripping. Available in either stainless steel, nickel plated steel, or brass. Overall length is 10" (24.5cm).
Catalog#  Description  
P35043 Stainless steel
P35044 Nickel plated steel
P35045 Brass


back to top


Eye Dropper
eye dropper
P31010

Glass pipette with 1 ml rubber nipple. 4" long with straight tip.
Catalog#  Description  
P31010 Glass Eye Dropper


back to top


Scoops & Spatulas
wood handle
P32600
scoop
P32601

Stainless steel lab spatula & lacquered wooden handle to fit scoop.
Catalog#  Description  
P32600 Wood handle, 5.5"L
P32601 Scoop, 6.5"L


back to top


micro spatula
P32602		 micro spatula
P32603
micro spoon
P32604		 micro spoon
P32605
stainless steel
P32606
Catalog#  Description  Specifications  
P32602 Micro Spatula 21cm L, 1 flat end
P32603 Micro Spatula 21cm L, flat end & pointed end
P32604 Micro Spoon w/ Plastic Handle 16.5cm L, round end & plastic end
P32605 Micro Spoon w/ Spoon and Flat ends 23.5cm L, spoon end & flat end
P32606 Stainless Steel Spatula Blade 4" L, 5/8" W


back to top


Petri Dishes

These plastic petri dishes are made of polystyrene. Packed in sterilized sleeves of 20.

 plastic petri dish
Catalog#  Description  
P32223 35x15mm, pk/20
P32225 50x15mm, pk/20
P32227 70x15mm, pk/20
P32229 90x15mm, pk/20


back to top


Pipettes
graduated, 1.0ml capacity
P32201
graduated, 3.0ml capacity
P32203
4.0ml capacity
P32210

These disposable, one-piece pipettes are excellent for basic liquid transfers or culture sampling. Made of polyethylene.
Catalog#  Description  Capacity  Quantity
P32201 Graduated, 0.25ml graduations, 6" long 1.0ml 500/pk
P32203 Graduated, 0.50ml graduations, 6" long 3.0ml 500/pk
P32210 6" long, draws 2.5ml per squeeze 4.0ml 500/pk


back to top


Test Tubes
plasic test tubes
These plastic test/culture tubes are made of polystyrene.
Catalog#  Description  Specifications  
P32231 Plastic Test/Culture Tube     12x55mm, pk/250
P32232 Plastic Test/Culture Tube 12x60mm, pk/250
P32233 Plastic Test/Culture Tube 12x78mm, pk/250
P32234 Plastic Test/Culture Tube 13x75mm, pk/250
P32235 Plastic Test/Culture Tube 13x78mm, pk/250
P32236 Plastic Test/Culture Tube 15x100mm, pk/250
P32291 Plastic Test/Culture Tube 8x50mm, pk/72
P32292 Plastic Test/Culture Tube 13x100mm, pk/72
P32293 Plastic Test/Culture Tube 12x75mm, pk/72


back to top



These micro test tubes are made of polypropylene

 micro test tube
Catalog#  Description  Specifications  
P32251 Micro test tube 0.5ml, pk/500
P32252 Micro test tube 1.5ml, pk/500
P32253 Micro test tube 2.0ml, pk/500


back to top


large clear plastic
P31056
This large, clear plastic test tube is virtually indestructible. Perfect for younger students. The threaded cap prevents spills. 6.5"L x 1.0"D
Catalog#  Description  
P31056 Plastic Safety Test Tube     


back to top


Home | Catalog | PacSci Retail Products |Contact Us
Copyright ©2004